Cleat Assembly Millennium 2 Sole

Information on how to assemble the cleats of the most known pedals present on the market is below.
Due to continuous changes and new products, it is not possible to indicate the features of all existing pedals.

When fixing the cleat of your pedal to the sole of your SIDI Millennium 2 sole, the forward-most screw must not penetrate beyond the base of your cleat by more than 6mm into the sole. For the rearward securing screws, they must not penetrate beyond the base of your cleat more than 7mm into the sole. Use of the wrong length screws could damage your shoes and void the warranty.

millennium soleTHREADED CLEAT PLATE
MILLENIUM 2 SOLE

  1. Remove the removable insole and lift the tongue to open the upper as much as possible.
  2. Use the cutter to cut along the dotted line.
  3. From the inside, carefully lift the slightly loosened innersole and, with a screwdriver from the outside, push the metal inserts out and substitute them.
  4. Position the innersole as before. Sidi may not be held responsible for inappropriate use which may damage the innersole.
    IMPORTANT!  Cleat plates cannot be replaced on GoreTex Shoe models.

Look KeoLOOK KEO PLATE

Place the original Look Keo cleat fixing it with the screws C - M5X10mm, use the Sidi screws provided with the spare part purchased separately.

 

 

 

Look PlateLOOK PLATE

Place the Look plate fixing it with the original Look screws A - M5x12mm.

 

 

 

Time PlateTIME PLATE

Place the SIDI Spacer • 2) Place the magnesium plate fixing it with the appropriate screws A - M5x10mm and B - M5x12mm • 3) Place the Time plates, add the washers and fix them with the original SIDI screws C - M4x12mm • Note: Please, use the SIDI screws provided with the spare part purchased separately.

 

Time RSX PlateTIME RXS PLATE

Place the Time RXS cleat with the screws A - M5X9 mm, suggested screw length for Sidi sole.

 

 

 

 

SHIMANO SPD - SL PLATE

Place the original Shimano SPD-SL cleat fixing it with the original Sidi screws A-M5X10mm, use the Sidi screws provided with the spare part purchased separately.

 

 

Dura AceDURA - ACE SHIMANO PLATE

Place the Dura Ace Shimano cleat fixing it with the original SIDI screws A-M5X12mm, use the Sidi screws provided with the spare part purchased separately.

 

 

 

 

CampagnoloCAMPAGNOLO PLATE

Place the Campagnolo cleat fixing it with the screws A - M5X11mm, (suggested screw length for Sidi sole).

 

 

speedplay

 

SPEEDPLAY

See Illustration.

 

 

 

WARNING! No bicycle shoes or other protective device can completely protect you in all foreseeable or unusual accidents. Riding bicycle might be dangerous. In the event of an upset, collision, or other accident, you may be seriously injured or killed, regardless of the type of protective equipment that you are wearing. Do not expect or depend upon your Sidi cycling shoes or other apparel to prevent or reduce injury in the event of an accident. Under some rare circumstances, the wearing of technical footwear may actually increase your injury. The only way to certainly avoid being injured while riding a bicycle is not to ride.