Hi-Tech

Hi Tech SoleCarbon Sole Replacement

  1. Remove the rubber heel pad (screw B).
  2. Remove the carbon inserts unscrewing the two screws A.
  3. Replace the spare parts carefully, apply the stickers provided as indicated and screw back A and B.

 

 

 

 

 

Hi Tech Carbon SoleHI-TECH CARBON  SOLE

  • When fixing the cleat of your pedal to the sole of your SIDI Carbon Sole, the forward-most screw must not penetrate beyond the base of your cleat by more than 6 mm into the sole. For the rearward securing screws, they must not penetrate beyond the base of your cleat more than 6.8 mm into the sole. Use of the wrong length screws could damage your shoes and void the warranty.

 

Anti_slip Hi Tech CarbonANTI-SLIP ADHESIVE HI-TECH CARBON SOLE

  • ANTI-SLIP ADHESIVE: Included in the box of the models that feature Carbon and Full Carbon sole.
    We suggest sticking it on the plate of the chosen pedal.

 

 

 

LOOK KEO CLEAT

  1. Remove screw A
  2. Place the original Look Keo cleat fixing it with screws C-M5X10mm, use the Sidi screws provided with the spare part purchased separately. We suggest leaving the screws B in place and periodically checking their fixing

 

 

look CleatLOOK CLEAT

  1. Remove screw A
  2. Place the original Look cleat fixing it with the original Look screws C - M5x12mm • Note: We suggest leaving the screws B in place and periodically checking their fixing.

 

 

 

 

Time CleatTIME CLEAT

  1. Remove screw A
  2. Place the SIDI Spacer
  3. Place the magnesium plate fixing it with the appropriate screws C - M5x10mm and D - M5x12mm
  4. Place the Time plates, add the washers and fix them with the original SIDI screws E - M4x12mm • Note: Please, use the SIDI screws provided with the spare part purchased separately. We suggest leaving the screws B in place and periodically checking their fixing.

 

 

 

 

Time RXS CleatTIME RXS CLEAT

  1. Remove screw A
  2. Place the Time RXS cleat with the screws C M5x9 mm (suggested screw length for Sidi sole).
    Note:We suggest leaving the screws B in place and periodically check their fixing.

 

 

 

Shimanio SPD Sl CleatSHIMANO SPD SL CLEAT

  1. Remove screw A.
  2. Place the original Shimano SPD-SL cleat fixing it with the original Sidi screws C-M5X10mm, use the Sidi screws provided with the spare part purchased separately. We suggest leaving the screws B in place and periodically checking their fixing.

 

 

 

CampagnoloCAMPAGNOLO CLEAT

  1. Remove screw A.
  2. Place the original Campagnolo cleat fixing it with screws C-M5X11mm, (suggested screw lenght for Sidi sole). We suggest leaving the screws B in place and periodically checking their fixing.

 

 

 

 

 

SpeedplaySPEEDPLAY CLEAT
See Illustration