Cleat Assembly for Full Carbon Sole

Information on how to assemble the cleats of the most known pedals present on the market is below.

Due to continuous changes and new products, it is not possible to indicate the features of all existing pedals.

Full Carbon SoleANTI-SLIP ADHESIVE,
FULL CARBON SOLE/HI-TECH CARBON SOLE

  • •ANTI-SLIP ADHESIVE: Included in the box of the models that feature Carbon and Full Carbon sole.
  • We suggest sticking it on the plate of the chosen pedal.

 

 

THREADED CLEAT PLATE
FULL CARBON SOLE - CARBON SOLE - HI-TECH SOLE

  1. Remove the removable insole and lift the tongue to open the upper as much as possible.
  2. If the shoes have a Tecno II buckle, make sure to completely open the buckle by unhooking the nylon string (see the Tecno II section).
  3. Use the cutter to cut along the dotted line.
  4. From the inside, carefully lift the slightly loosened innersole and, with a screwdriver from the outside, push the metal inserts out and substitute them.
  5. Position the innersole as before. Sidi may not be held responsible for inappropriate use which may damage the innersole.

FULL CARBON SOLE

  • When fixing the cleat of your pedal to the sole of your SIDI Full Carbon sole, the forward-most screw must not penetrate beyond the base of your cleat by more than 6mm into the sole. Use of the wrong length screws could damage your shoes and void the warranty.

 

 

Look KeoLOOK KEO CLEAT
FOR FULL CARBON SOLE

  • Place the original Look Keo cleat fixing it with screws C-M5X9mm, (suggested screw length for Sidi sole).

 

 

 

 

 

LookLOOK CLEAT

  • Place the original Look cleat fixing it with screws C M5X11mm (suggested screw length for Sidi sole).

 

 

 

 

 

 

Time RXSTIME RXS CLEAT

  • Place the Time RXS cleat with the screws C M5x7mm (suggested screw length for Sidi sole).

 

 

 

 

 

 

Shimano SPD SlSHIMANO SPD SL CLEAT

  • Place the original Shimano SPD-SL cleat fixing it with the screws C-M5X8mm (suggested screw length for Sidi sole).

 

 

 

 

 

 

Shimano SPD SlCAMPAGNOLO CLEAT

  • Place the original Campagnolo cleat fixing it with screws C-M5X9mm D M5X10mm (suggested screw length for Sidi sole).

 

 

 

 

 

 

 

Shimano SPD SlSPEEDPLAY PLATE

See illustration.

 

 

 

 

 

 

WARNING! No bicycle shoes or other protective device can completely protect you in all foreseeable or unusual accidents. Riding bicycle might be dangerous. In the event of an upset, collision, or other accident, you may be seriously injured or killed, regardless of the type of protective equipment that you are wearing. Do not expect or depend upon your Sidi cycling shoes or other apparel to prevent or reduce injury in the event of an accident. Under some rare circumstances, the wearing of technical footwear may actually increase your injury. The only way to certainly avoid being injured while riding a bicycle is not to ride.